Product Media Info

Name | Sku

Shipping 

Brand | COO

Price Unit

AC Branch Circuit.
(M Series)

Enphase

USD$60.00

Enphase model EKIT-01-001 M-series installation kit for one AC branch circuit Order one install kit for each AC branch circuit of up to 15 modules in a 240-volt M190 system, 13 modules in a 240-volt M210 system, 21 modules for a 208-volt M190 installation and 18 modules for a 208-volt M210 system. An extension cable is required when inverters are mounted more than 6 feet apart.

OPTM-TIGO-EKIT

Return
30 Days

USA

AC Interconnection Extension 6" (M Series)

Enphase

USD$73.00

Cable Extensions have inverter quick-connect plugs on both ends for extending the distance between inverters on the roof. Each branch circuit of D380 Twin Pack Microinverters requires an AC interconnect cable. The AC Interconnect cable is available in 6, 12, or 20 foot lengths. Any unused connectors in the array should be protected from the elements with an end cap. The end cap fits both the female connectors for the trunk portion of the cable and the female connectors for the inverter drops.

OPTM-TIGO-EEXC6

Return
30 Days

USA

AC Interconnection Extension 12" (M Series)

Enphase

USD$92.00

Cable Extensions have inverter quick-connect plugs on both ends for extending the distance between inverters on the roof.The AC Interconnect cable is available in 6, 12, or 20 foot lengths. Any unused connectors in the array should be protected from the elements with an end cap. The end cap fits both the female connectors for the trunk portion of the cable and the female connectors for the inverter drops.

OPTM-TIGO-EEXC12

Return
30 Days

USA

AC Interconnection Extension 20" (M Series)

Enphase

USD$110.00

Cable Extensions have inverter quick-connect plugs on both ends for extending the distance between inverters on the roof. Each branch circuit of D380 Twin Pack Microinverters requires an AC interconnect cable. The AC Interconnect cable is available in 6, 12, or 20 foot lengths. Any unused connectors in the array should be protected from the elements with an end cap. The end cap fits both the female connectors for the trunk portion of the cable and the female connectors for the inverter drops.

OPTM-TIGO-EEXC20

Return
30 Days

USA

AC Interconnection Extension 6" (D Series)

Enphase

USD$50.00

Cable Extensions have inverter quick-connect plugs on both ends for extending the distance between inverters on the roof. Each branch circuit of D380 Twin Pack Microinverters requires an AC interconnect cable. The AC Interconnect cable is available in 6, 12, or 20 foot lengths. Any unused connectors in the array should be protected from the elements with an end cap. The end cap fits both the female connectors for the trunk portion of the cable and the female connectors for the inverter drops.

OPTM-TIGO-ECWP6

Return
30 Days

USA

AC Interconnection Extension 12" (D Series)

Enphase

USD$75.00

Cable Extensions have inverter quick-connect plugs on both ends for extending the distance between inverters on the roof. Each branch circuit of D380 Twin Pack Microinverters requires an AC interconnect cable.  The AC Interconnect cable is available in 6, 12, or 20 foot lengths. Any unused connectors in the array should be protected from the elements with an end cap. The end cap fits both the female connectors for the trunk portion of the cable and the female connectors for the inverter drops.

OPTM-TIGO-ECWP12

Return
30 Days

USA

AC Interconnection Extension 20" (D Series)

Enphase

USD$105.00

Cable Extensions have inverter quick-connect plugs on both ends for extending the distance between inverters on the roof.Each branch circuit of D380 Twin Pack Microinverters requires an AC interconnect cable.  The AC Interconnect cable is available in 6, 12, or 20 foot lengths. Any unused connectors in the array should be protected from the elements with an end cap. The end cap fits both the female connectors for the trunk portion of the cable and the female connectors for the inverter drops.

OPTM-TIGO-ECWP20

Return
30 Days

USA

Trunk cable with drops for D380, 240VAC

Enphase

USD$90.50

ET3R-G2-06 green label trunk cable is used for 208 or 240 Vac single phase installations.The D380 Twin Pack cable assembly is constructed with a 12 gauge trunk cable and three “drop” cables at the inverter locations. The drop cables are spaced at two module-wide intervals. The 12 gauge trunk cable would be protected with a 20 amp circuit breaker allowing up to 33% more power per branch circuit. A single 20 amp branch circuit would allow for up to 10 D380 Twin Pack Microinverters (20 PV modules) at 240 Vac.

OPTM-TIGO-ET40

Return
30 Days

USA

Trunk cable with drops for D380, 208VAC

Enphase

USD$90.50

ET3C-G2-06 blue label trunk cable is used for 208 three phase installations. The D380 Twin Pack cable assembly is constructed with a 12 gauge trunk cable and three “drop” cables at the inverter locations. he drop cables are spaced at two module-wide intervals. The 12 gauge trunk cable would be protected with a 20 amp circuit breaker allowing up to 33% more power per branch circuit. 15 D380 Twin Pack Microinverters (30 PV modules) at 208 Vac.

OPTM-TIGO-ET08

Return
30 Days

USA

Extension cable, both ends, 6 ft. for D380

Enphase

USD$60.00

Depending on the number of D380 units in the branch, you may need to use a “single-drop” cable to connect the final D380 Microinverter to the branch. The single-drop cable connects to the end of the last trunk cable assembly, and eliminates the need for an end-cap. If you have two D380 units to connect to the end of the branch, you will need two end-caps: one to cover the one unused drop on the three-drop cable and one to cover the unused trunk end of the three-drop cable. EEXC-G2-06 product code

OPTM-TIGO-EEX6

Return
30 Days

USA

Extension cable, both ends, 12 ft. for D380

Enphase

USD$90.00

Depending on the number of D380 units in the branch, you may need to use a “single-drop” cable to connect the final D380 Microinverter to the branch. The single-drop cable connects to the end of the last trunk cable assembly, and eliminates the need for an end-cap. If you have two D380 units to connect to the end of the branch, you will need two end-caps: one to cover the one unused drop on the three-drop cable and one to cover the unused trunk end of the three-drop cable. EEXC-G2-12 product code

OPTM-TIGO-EEX12

Return
30 Days

USA

Extension cable, both ends, 20 ft. for D380

Enphase

USD$120.00

Depending on the number of D380 units in the branch, you may need to use a “single-drop” cable to connect the final D380 Microinverter to the branch. The single-drop cable connects to the end of the last trunk cable assembly, and eliminates the need for an end-cap. If you have two D380 units to connect to the end of the branch, you will need two end-caps: one to cover the one unused drop on the three-drop cable and one to cover the unused trunk end of the three-drop cable. EEXC-G2-20 product code

OPTM-TIGO-EEX20

Return
30 Days

USA