Quantcast
 Loading...in few seconds...

Click to Call Toll Free: (800) 339-9171
8:00AM EST - 8:00PM EST Mon. to Sat.




MAGNUM PT 100 MPPT CHARGE CONTROLLER 100A 12/24/48 VDC

 

News posted on: 15th Nov 2015 @ 9:09 PM

MAGNUM PT-100 CHARGE CONTROLLER, MPPT CONTROL, 100 A, 12/24/48 VDC BATTERY BANK
Magnum PT 100

The PT-100 is a product under the Magnum-Dimensions brand (ex Magnum Energy) from Sensata Technologies. Sensata Technologies until 2006 were called Texas Instruments Sensors & Controls. The Magnum-Dimensions brand began as two well-known inverter companies, Dimensions Inverters and Magnum Energy. Dimensions Inverters joined Sensata Technologies in 2007 and Magnum Energy in 2014. Under the Magnum-Dimensions brand, Sensata Technologies continues to manufacture exceptional inverters from previous Magnum Energy line of products and to add new ones. :-

The PT-100 is a Maximum Power Point Tracker (MPPT) charge controller specifically designed to harvest the maximum available energy from the PV array and deliver it to the batteries. The MPPT algorithm in the PT-100 is designed to find the maximum power point of the array and to operate at this point while regulating the output current and battery voltage to fully charge the battery. The PT-100 is simple to use and reliable, providing maximum flexibility in sizing your PV array and charging different battery types:-

Features:-

  1.   MPPT: Maximum Power Point Tracking technology for increased PV power output efficiency.

  2.  Multi-state Charging: Maximizes system performance and improves battery life.

  3.  Optimal Battery Charging: Maximizes system performance and improves battery life.

  4.   Voltage Options: Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage.

  5.  GFDI: Integrated PV Ground- Fault Detection and Interruption/ Indication, with pre-fault leakage/ diagnostic metering.

  6.  Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection.

  7.  Support a Large PV Array: A single controller supports a large PV array up to 6600W.

  8.  High Efficiency: The PT-100 provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode.

  9.  AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC).

  10.  Includes: LED Indicators and Screen.

The information herein has been compiled by Clean Energy Brands from OEM product data and reputable publications. The information posted in this blog it is related to the time stamp when for the first time it was published.