Loading...in few seconds...

Click to Call Toll Free: (800) 339-9171
8:00AM EST - 8:00PM EST Mon. to Sat.

Bogart Eng.TriMetric TM-2025-A-F Amp-Hour Meter w/Fuse

Listed Price:
074 - 071112
3.00 LBS
Calculate at checkout
Gift Wrapping:

Bookmark and Share

Product Overview

Bogart Eng.TriMetric TM-2025-A-F Amp-Hour Meter w/Fuse

The TriMetric is used to monitor battery systems used in remote homes, RV’s or boats that have batteries that store solar, wind, or possibly generator powered chargers. They will help you maintain your batteries.

The TM 2030A-F battery monitor is designed for flush mount installations, or to fit into a standard "double-gang" electrical box mounted 90 degrees from the usual position (electrical box not included).

All models are designed to monitor the following:-

  “Percent Full” (“State of charge”) of your batteries, so you can see if you need to charge them more, or check that overall usage is less than your charging resources.,
  Volts of the batteries, for example to check that they are being charged at proper voltage.,
  Energy going in, or out of your batteries, measured in Amps or Watts, so you can see that your charging sources are charging properly, or how much current your loads are using.,
  How many days since the batteries were fully charged: to remind you to not wait too long between fully charging your batteries to maximize their life,

Before you buy be aware of the return policy conditions and read the manufacturer warranty.

General Specifications:-

May be located up to 100 feet (30 m) from batteries:-

Connect with four AWG 22 (.644 mm2) wires. Up to 300 feet (90 m) with AWG 18 (.823 mm2) wire. Longer distances are possible with larger wire size.

Choice of two shunts for use with TriMetric battery Monitor:-

Choose one of the following shunts for making the “Amps” and Amp-hour measurement as shown in photo below.

500Amp-50 mV shunt:-

For systems with maximum current 400 Amps continuous with no overloads, or 300 Amps continuous with up to 5 minute overloads to 500 Amps max. It allows Amps readings as low as 0.1 amps. Suitable for most systems with moderate or large sized inverters. Size 3-1/4 by 1-3/4 inch base, 1-7/8 in high. (8.3 x 4.4 x 4.75 cm) • 100 Amp-100 mV shunt: For systems with maximum current 70 Amps continuous with no overloads, or 50 Amps continuous with overload to 100 Amps for 8 seconds max. Suitable for small systems, or for most applications where you want to measure only solar or wind input current. It allows “Amps” readings as low as 0.01 amps.

Cable for connecting meter to shunt:-

#22 gauge 4 wire twisted pair. 35 foot or 50 foot (10.5 m or 15 m) versions. With 3 small ring,

[ Tech Support ]  Product Video(s) & Knowledge Base Information
Fold | Unfold [ click ]  Read more...    

[ click on each of thumb picture to open the video player bellow ]


By displaying product related videos on our site we do comply to the YouTube API Terms of Service. We are not liable for the technical content of the video material we present herein despite we do check for general conformity prior posting. The video material is for educational purpose only!

Product Related Documents

 Installation Notes:

By engaging the links above you will download a copy of the documents on your machine. The documents must be used for their informational purpose only. We regularly update the product documentation based on the last release from the manufacturer.

Product Warranty Information

The Bogart Engineering warranty policy is to repair at no cost any of their products that develop a problem not due to customer misuse. One ( 1 ) Year Warranty.

-30 Days CEB Return Policy

30 Days Return CEB Return Policy - Important: Condition apply: like original packing, original sealed, never connected to load or mounted on a support or installed in an enclosure.

Product Returns Policy (extras)

From CEB Return Policy Extras

Most of unused products can be returned back to us for a replacement or refund within 30 days of receipt. All returned items must be in new condition with all original packaging, paperwork and accessories supplied. All returns have to be send back via a traceable method such as Fed Ex, DHL, Purolator and USPS or similar. Return freight and original shipping are non-refundable.

All special orders, electrical appliances, appliances of any nature, items returned without original packaging or packing materials, and items sent directly from the manufacturer may be subject to a restocking fee of 10-25%. Please call us before you perform your return in order for us to issue an RMA prior any shipping is undergoing.

Please include your order number along with RMA issued by one of our staff. Without an order number and an RMA number, it will be very difficult to trace the order for the returned merchandise associated with and all the process will drag for weeks or month to come. In order to complete the return procedures please fill in the forms and follow our instructions.

All returns must be in their ORIGINAL PACKAGING, in a resalable condition. Any packaging materials, CDs, software, accessories, manuals, warranty cards and documentation originally sent must be included in the package. In the event that a package is returned and does not meet the guidelines we’ve listed above, CleanEnergyBrands reserves the right not to honour the return.

Return Merchandise Authorization(RMA):-

In order to process our customers’ returns as quickly and successfully as possible, we require ALL returns to be accompanied by an RMA so please be sure to contacting us before returning any items. To obtain your RMA and any additional return info you may need, please call our friendly, ready-to-help support team toll-free at 1.800.339.9171 or email us at returns@cleanenergybrands.com

Because we want your return experience to be as hassle-free as possible, we strongly recommend that you fully insure your return shipment so that you’re well protected in the event that the package is lost or damaged in transit. UPS & FedEx provide traceable shipments, complete with a proof-of-delivery feature that guarantees that your package is delivered to the intended location. We urge you to use a carrier that has both tracking and proof-of-delivery capabilities and that you retain that tracking number. Please be advised that postage charges are non-refundable, and that Clean Energy Brands is not responsible for any packages lost or damaged during transit. This includes packages sent via USPS to an international or overseas destination.

Defective Product; Incorrect Product:-

Please call for an RMA so we will arrange for a return for the defective/incorrect item and replace that at no cost to you. The item must include its original packaging and as-new in pristin conditions with the packing slip, all warranty cards, and accessories included.

For more information consult "Returns Refunds" policy. Follow this link!

30 Days Return CEB Return Policy - Important: Condition apply: like original packing, original sealed, never connected to load or mounted on a support or installed in an enclosure.

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!